Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Indoor Cycling

Wahoo KICKR Desk
$249.99
The Wahoo KICKR Desk is the desk for multi-tasking. Use it as an indoor cycling desk with your KICKR or as a standing desk in your office. It's fully adjustable to allow you to easily optimize for and switch between the following: - Standing - Sitting upright - Riding with hands on hoods - Riding in the drops - Riding in aero bars The desk has built-in tablet and smartphone stands and built-in holes to connect all your computer technology. A steel frame makes it sturdy and a slip-resistant surface will keep everything in place - no matter how much you sweat. - With the push of a button, you can lower or raise the desk to sitting or standing position. - Easily move the desk out of your sweat zone. The desk can roll through most doorways. - Get maximum stability and sturdiness with the formed steel tube frame and baked-on polymer finish. - Prop up and secure your tablet or smartphone in the desk and see your cycling app while on your KICKR or screen while working. - Keep all your technology untangled and out of the way with cord holes integrated into the tablet/smartphone stand. - Rubber mat keeps everything in place on the desk, no matter how much you are sweating or how hard you are working.
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Saris H3 Direct Drive Smart Trainer
$999.99
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
Saris Mag+
$229.99
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
CycleOps Climbing Riser Block
$29.99
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps H2 Smart Trainer
$1,199.99
No matter your training category, the H2 is the perfect addition to any athlete’s toolbox. From weekend warriors to pro-podium chasers, mountain bikers to triathletes, this smart direct drive trainer is versatile enough to push any training regimen to the edge. The heart of the H2 is its ability to replicate real world inertia better than anyone else thanks to it its massive, 20-pound precision-balanced flywheel. The H2’s soul is its impressive electrical prowess, complete with integrated cadence, speed and power data, internal cooling, over-the-air firmware updates, dual-band ANT+ and Bluetooth compatibility and topped off with its electromagnetic resistance system for rapid resistance changes within virtual training environments. Plus, at 64 decibels the H2 is library-level quiet - even if your next virtual victory may not be. - Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. - PowerTuned using PowerTap technology for up to +/- 2% accurate power readings. - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Compatible with a wide variety of devices and virtual training application, including Rouvy, Zwift, TrainerRoad and many more. - - - - - Contact us with questions about compatibility with other software. - 20 lb precision balanced flywheel provides quiet, vibration free and true-to-the-road riding experience. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 2000 watts at 20 mph and can simulate up to a 20% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Integrated front wheel tray adds stability to ride without taking up any extra storage space. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Built-in front wheel tray adds stability to ride and nests within the trainer when not in use. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Includes a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. XD freehubs are also available and sold separately. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates via Bluetooth ensures the H2 is up to date with all the latest features. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Dimensions when Open L*H*W: 31” x 18.5” x 19.5” (787.4 x 469.9 x 495.3 mm). - Dimensions when Closed L*H*W: 8.5” x 18.5” x 19.5” (76.2 x 469.9 x 495.3 mm). - Weighs in at 47 lb. (21.3 kg). - ANT+ and BlueGiga USB dongles sold separately. - Cassette not included. - Zwift certified.
CycleOps Trainer Accessory Kit
$99.00
Create your own at-home cycling studio with CycleOps' Trainer Accessory Kit. CycleOps equips you with three RealRide DVDs, a trainer tire, and two climbing blocks so you can sprint and climb your heart out. A bike Sweat Guard and Trainer Mat keep your equipment and home like new.
CycleOps Trainer Thru Axle Adapter
$49.95
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Tacx Antares
$199.99
With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000
Tacx Axle Nuts
$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
Tacx Direct Drive Freehub Body, Campagnolo
$79.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Tacx Direct Drive Quick Release with Adapter Set
$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Tacx E-Thru Trainer Axle
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Tacx NEO Track
$249.99
The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store
Tacx Quick Release for Rear Wheel
$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Tacx Trainer Adapter for X-12 Axle
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Tacx USB ANT+ Antenna
$69.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Sunlite Dual Size Trainer Riser Block
$21.99
• Plastic riser block allows the position of front wheel at one of two heights
Sunlite FlatForm II Exerciser Pedal Straps
$6.99
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Sunlite Trainer Mat
$41.99
• 35.5-inches x 79-inches • Black
Saris 142X12 Boost Thru Axle Adapter
$59.99
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Saris 20/24-inch Wheel Adapter
$69.99
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Saris Aluminum Roller
$299.99
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
Saris Fluid
$249.99
JFK once said, “Nothing compares to the pleasure of riding a bike.” Here at Saris, we couldn’t agree more. That’s why we’re committed to helping bicyclists of all types get on their bikes and ride. The Fluid bike trainer can help you do just that, no matter the season, schedule or time of day. Its fluid progressive resistance matches your effort without hardly making a sound, no adjustments needed. Plus, the Fluid comes with a durable, foldable, and easy-to-store trainer frame. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Comes on an easy-to-store, foldable bike trainer frame - Compatible with Zwift and other indoor training apps
Saris Fluid2 
$299.99
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Saris Leveling Block
$19.99
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Saris M2 Smart Trainer
$499.99
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
Saris MP1 Nfinity Trainer Platform
$1,199.99
A League of Its Own Since their inception, bike trainers have set out to solve one problem: simulating outdoor riding, indoors. Then came smart trainers and indoor cycling apps, complete with virtual races, group rides and controlled workouts. Suddenly athletes across disciplines were eager to ride indoors. The indoor training renaissance isn’t over. To make the experience even better, and to harness all the benefits riding indoors has to offer, you need a way to stay comfortable and engaged. The MP1 Nfinity Side-to-side movement isn’t new, but it also doesn’t capture the natural movement you experience outdoors. The MP1 with Nfinity technology truly moves the way you do because it adds the fore/aft axis to the equation. The MP1 combines over 20 years of indoor training expertise to not only create the movement platform category – but to perfect it. The result is an unparalleled trainer platform that reimagines the indoor trainer experience altogether. Features Introducing Nfinity Technology In order to bring stationary cycling to life, the MP1 needed movement in multiple axes. The result is an innovative technology combining curves, axes, gravity physics and mechanical ingenuity. The MP1 is the only way to experience this revolutionary technology. Compatible with Nearly Any Bike Trainer If you can experience the freedom of movement indoors, then why limit access with trainer compatibility? We believe that anyone with a bike trainer that fits should be able to tap into the benefits of Saris Nfinity Technology via a ride on the MP1 – which is pretty much everyone. So grab your trainer and check our bike trainer fit guide. Increased Comfort Riding a bike indoors can be uncomfortable because your movement is typically limited by the trainer. Pressure mapping and motion capture technology shows the MP1 significantly alleviates saddle and foot pressure compared to riding a static trainer. Recruit More Muscles It’s true that adding your trainer of choice to the MP1 engages more muscles than a stationary ride. From engaging the upper body to get through sticky spots to activating smaller, key muscles to stay balanced, the MP1 is the only way to recruit large and small muscle groups while riding inside. Adjustable Touch Points The MP1 is compatible with a wide range of setups. Complete with adjustable touch points and well-placed grip tape, the MP1 platform can be used with nearly every indoor bike trainer and training footprint. Looks Good, Too The MP1 looks as good as it moves. The platform deck is made from beautiful birch, while steel sourced from America’s heartland ensures the MP1 can handle the hardest of efforts. For the most cohesive aesthetic, the MP1 is the cornerstone of the Saris trainer eco-system, complete with the trainer desk and smart trainer of choice. It’s Fun, Pure and Simple Our goal was to make the time spent indoors as enjoyable as possible. The movement platform not only enhances the virtual training experience, the MP1 with Nfinity Technology brings indoor training to life. - Nfinity Technology: revolutionary tech that brings movement indoors. - Movement for All: compatible with a variety of training configurations; bikes, desks and nearly every trainer available. - Trailblazing: the MP1 ushers in a type of riding never seen or felt before. - Pure Fun: a responsive, immersive and authentic training experience that’s anything but boring. - Get Comfortable: reduces pressure on touch points so you can put in the miles. - Eye-Catching: mix of steel, aluminum and birch compliment most training spaces. - Personalized Eco-System: put the MP1 at the center with your trainer of choice to create your ideal training station. Specs - Max Fore-Aft Travel: 9.5” - Max Side-to-Side Angle: 6° - Compatible with all major brands and models of bike trainers. - Materials: Steel, aluminum and birch - Weight: 62 lb - Dimensions: 6” tall x 63” long x 35.5” wide - Fully assembled in box - Grip tape strategically placed to assist in walking on the trainer platform. - Tested to the combined weight (rider, bike and trainer) of 350 lb. - Built-in front wheel block for road and MTB.
Saris Mag+ Shifter
$29.99
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Page 1 of 2 Next page