The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers - (3) DS-2 narrow dropout savers
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
The Speedplay Cleat Fastening Screw Torque Wrench provides the proper torque of 2.5Nm / 22 in-lbs. required when installing the 4mm Cleat Fastening Screws (8) used with all Speedplay road cleats. Includes a removable #2 Philips bit.
When everything but the kitchen sink is all that will suffice, you need the EMT 12 Tool. With 12 different tools, you'll be prepared to fix whatever bad luck mechanical the road or trail decides to throw your way. - Forged aluminum side plates. - Forged steel bits are nickel plated for corrosion resistance. - 2, 2.5, 3, 4, 5, 6, and 8mm hex bits - T25 Torx, Phillips head, and flat blade screwdriver bits. - Chain breaker with spoke wrenches. - Forged aluminum side plates.
If lightweight, minimalist, and wallet-friendly are at the top of your tool priority list, look no further than the EMT 6 Tool. With six different bits, you'll have plenty to manage common roadside mechanicals. - Forged steel bits are nickel plated for corrosion resistance. - 3, 4, 5, and 6mm hex bits - T25 Torx and Phillips head screwdriver bits.
Attach this handy multi-tool to your Specialized SWAT-equipped water bottle cage (sold separately) and hit the trails secure in the knowledge that your tools are close at hand. The tool features hardened steel bits with an anti-rust coating and the plastic tool cradle holds securely and rattle-free thanks to the two attachment points.
Specialized's EMT Road Multi Tool includes 3, 4, 5, 6 and 8mm Allen wrenches, a T25 torx, and a regular screwdriver. And, it mounts to the bottom of any Rib Cage II water bottle cage (sold separately).
Specialized's Mechanic's Wrench Set is a complete set of the most common Allen and Torx wrenches used in bicycle repair. The Allens come with a handy holder. This essential kit includes 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches in the holders, and T25 and T30 Torx wrenches for use on disc rotors and chainring bolts. What's more, the Allen wrenches feature Bondhus heads on the long ends, which make turning hard-to-reach bolts easy. There's also an awl on the end of the 1.5 Allen for rounding cut housing. Plus, the Allens have rubber handles for a great grip.
Specialized's Road Kit is the complete SWAT technology solution for the new SWAT-prepped Roubaix and Ruby road bikes. This kit seamlessly integrates storage for everything that you need in the event of roadside repairs. - Includes SWAT Road multi-tool, CO2 twist head, 700c Turbo tube, valve extender, and money clip. - Also holds 16g CO2 cartridge (not included). - For use on applicable SWAT-prepped Roubaix and Ruby bikes.
$15.00 - $25.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Before you find yourself in a bind, it's important to plan on how you'll get out of one. Well, look no further than our SWAT Conceal Carry MTB Tool. It stashes an emergency multi-tool and chain breaker inside the steerer tube of a suspension fork for easy transport and instant access. On the tool, you'll find a wide array of Allen keys and a Torx wrench, so you'll be able to get out of any trail-side jam. - Stores a multi-tool and chain breaker in the steerer tube of most modern suspension forks with alloy steerer tubes. - Quick-action top pivots away to release spring loaded multi-tool. - Features hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes 3, 4, 5, 6, and 8mm Allen keys and a T25 Torx.
$30.00 - $35.00
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.
A CO2 inflator and mini tool in one! The Serfas ST-15i features 1.5, 2, 3, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, tire levers, glueless patches and aCO2 inflator head (cartridges sold separately).
- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. It installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport. - Note: This product is thread pitch dependent. You must order the same thread pitch as the thru-axle in your bike. - Dummy axle is precision-machined from 7075 aluminum and knurled for easy grip. - Pulley is machined from durable Delrin. - Oil and solvent-resistant O-ring - Lead-in threads designed for quick insertion into the frame - No tools required, simple, one-hand installation - Weight: 62 grams
The smartest, most convenient torque key now comes with bits to suit every need. Same great T-handle shape and reliable “click” when reaching the max torque. - Includes Hex 3/4/5, Torx T-20/25, and Philips #1 - 5nm max torque - Bit holder included
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
$5.90 - $13.00
- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications
- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver - Torx 10 / 25 - Chaintool - Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm
The Chain Pig II hands-free chain cleaner will change the way you think about cleaning your chain. Just one use with Pedro's latest solvent-free degreasers and you too will become a believer just as so many riders and skeptical pro mechanics have. The Chain Pig II provides a simple, efficient, and effective way to clean the chain without making a mess or wasting valuable degreaser. Each element has been designed to outperform and outlast the competition. The upper and lower bodies are made from super-strong, chemical and impact-resistant plastic and new Chain Pig II features stainless steel button arms, along with other improvements, to further increase durability. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. The drag-free derailleur hook is a game-changer providing simple use, real hands-free operation, and alignment allowing seriously high run speeds that increase effectiveness and efficiency. The Chain Pig II has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and onto the chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning. - Pro-grade brushes and super absorbent sponge eat chain grime for breakfast, and are always hungry for more - Surgically enhanced with stainless steel hardware and body sculpting ready for epic drivetrain battles - Innovative quick-lock closure and drag-free derailleur hook for easy use and hands-free operation - Lean and mean, this hog requires only 1oz of degreaser
Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. The Folding Hex Set weighs 110 grams and has 8 tools: 1.5, 2, 2.5, 3, 4, 5 and 6mm hex wrenches plus T25 Torx. Backed by Pedro's lifetime warranty. - 110 gram, 8-function shop quality folding tool with 1.5, 2, 2.5, 3, 4, 5 and 6mm hex wrenches plus T25 torx wrench - Super strong composite body features new design with improved comfort, better leverage, and stay-tight bolt design - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance
Pedro's Bit Set is designed to work with their Demi and Pro Torque Wrenches, offering the most common sizes required. Made from heat-treated steel for strength and long-lasting performance, this set includes a 1/4" drive adapter, 2, 2.5, 3, 4, 5, 6, and 8mm hex bits, and T25 torx bit. - Perfect companion for your Pedro's Demi or Pro Torque Wrench - Made from heat-treated steel to ensure strength and long-lasting performance - Includes 1/4" socket adapter, 2, 2.5, 3, 4, 5, 6, and 8mm hex bits, and T25 torx bit
The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder
Hex and torx wrenches are the lifeblood of the modern bicycle mechanic. Drawing upon years working closely with the finest mechanics in the world, true masters of their craft, Pedro's developed The Master T-Handle Set to meet the rigor and versatility required by the best. The set, housed in a custom storage pouch, includes hex and torx sizes used day in and day out; 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, and T10, T25, and T30 torx wrenches. Each wrench is crafted from premium 6150 alloy tool steel and features three hardened precision tips ready to tackle any task. A three-position sliding t-handle design and extra-long extended leg offer the ultimate combination of speed, ergonomics, leverage, and versatility. - Each wrench features premium tool steel and three hardened precision tips ready to tackle any task - Three-position sliding t-handle design and extra-long extended leg offer the ultimate in speed, ergonomics, leverage, and versatility - Set of 10 wrenches includes: 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, T10, T25, and T30 torx wrenches, and custom storage pouch
- Made from laser cut tool steel heat-treated for strength and lasting performance - New design features 24mm socket driver for use with Pedro's professional socket tools - 290mm length and ergonomic shape provide excellent leverage and comfort - Smaller lightweight design perfect for travel and the toolbox Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.
Having the right tool for the job is essential when working on modern bicycles. Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks. Unlike similar items offered by the competition, Pedro's includes everything you need in one convenient package The Universal Crank Remover fits all cranks using 22mmx1 threads and square, tapered bottom bracket spindles and splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a “self extracting” system.
Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
Page 1 of 23 Next page