Parts & Accessories
$9.00 - $13.00
Zipp's Tangente Valve Extender is for use with Zipp butyl inner tubes and Zipp Tangente tubular tires with removable valve cores; and other leading tubular tires and inner tubes that have removable cores. It lengthens the valve so that it protrudes far enough from deep-section aero rims/wheels so that you can attach your pump to inflate your tire. This extender is made of lightweight aluminum, has a threaded tip for you to screw in your valve core so you can still seal the valve, and it is made with the same attention to detail that's built into Zipp's wheels and other products.
Zipp's Tangente Valve Wrench Set includes the two specially-sized aluminum wrenches needed to install their Tangente Valve Extenders (sold separately).
$8.95 - $11.95
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Vittoria's Presta Valve Extenders come in a pair, include a valve tool, and measure 62mm long. They're just the ticket for deep section rims.
$20.99 - $27.95
- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$3.95 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. This is enough sealant for one tire.
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
$8.00 - $26.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
The Specialized Rim Strips provide the ultimate in protection between the rim and tube.
Optimized for carbon and aluminum rims, our top shelf tubular glue is a next generation formula. Derived from the most used and proven European recipe that has carried rubber on wheels for the Pro Peloton for decades. - Perfect for carbon and aluminum rims - Nitrile gloves in bottom of box to keep your paws clean - Red in color allows one to know where glue has been applied - Brush included on lid - Contains enough to mount 3 wheels
$11.99 - $14.95
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$23.99 - $24.99
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
- 2-ply rubber shield fits between tire and tube to prevent flats
$23.90 - $27.95
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
- Designed specifically for 2017+ Giant Off-Road wheelsystems - Accomodates Wider Rim Profile Of 2017+ Wheelsystems - Durable Black Anodized Finish
- For use with Giant proprietary wheelsystems - 38mm valve stem - Removable valve core for easier application of tire sealant - 2 per package - 87202: Road Disc WheelSystem specific
Make your tubeless wheels setup effortless with Giant's WheelSystem tubeless valve stems. The removable cores make adding sealant quick and easy.
Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.
Continental Carbon Rim Cement adheres to carbon fiber rims better than standard tire glue. This is Continental's glue for gluing tubular ("sew-up") tires on carbon tubular rims. - This 200g Can has a brush built into the screw-on cap for easy glue application.
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
Grenade style Schrader Valve caps
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Page 1 of 4 Next page