Parts & Accessories
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
$9.00 - $13.00
Zipp's Tangente Valve Extender is for use with Zipp butyl inner tubes and Zipp Tangente tubular tires with removable valve cores; and other leading tubular tires and inner tubes that have removable cores. It lengthens the valve so that it protrudes far enough from deep-section aero rims/wheels so that you can attach your pump to inflate your tire. This extender is made of lightweight aluminum, has a threaded tip for you to screw in your valve core so you can still seal the valve, and it is made with the same attention to detail that's built into Zipp's wheels and other products.
$8.95 - $11.95
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Vittoria's Presta Valve Extenders come in a pair, include a valve tool, and measure 62mm long. They're just the ticket for deep section rims.
$20.99 - $27.95
- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$3.95 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$8.00 - $26.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.
Optimized for carbon and aluminum rims, our top shelf tubular glue is a next generation formula. Derived from the most used and proven European recipe that has carried rubber on wheels for the Pro Peloton for decades. - Perfect for carbon and aluminum rims - Nitrile gloves in bottom of box to keep your paws clean - Red in color allows one to know where glue has been applied - Brush included on lid - Contains enough to mount 3 wheels
$19.49 - $32.35
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum - Kit includes two 40mm long brass tubeless valves
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$23.99 - $24.99
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
- 2-ply rubber shield fits between tire and tube to prevent flats
$23.90 - $27.95
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
$49.99 - $79.90
- Just like the Original version except specially designed for FatBike applications - 2-ply rubber shield fits between tire and tube to prevent flats - Fits both 26-inch and 29-inch tires
Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Sold as a card of 12
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
- Designed specifically for 2017+ Giant Off-Road wheelsystems - Accomodates Wider Rim Profile Of 2017+ Wheelsystems - Durable Black Anodized Finish
Make your tubeless wheels setup effortless with Giant's WheelSystem tubeless valve stems. The removable cores make adding sealant quick and easy.
Page 1 of 4 Next page